MAZUT M100, Heating Oil
Fuel oil mazut 100 is supplied according to the Russian technical specification GOST 10585-99, section for fuel oil, -mazut sort 100. This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. Origin country for this kind of mazut is only Russia. It is very limited volume of this mazut available for export from Russia because of the following reasons:
1) There is limited number of producers in Russia, who produce this kind of mazut. All of them are the big Russian oil companies, like Lukoil, Rossibneft, etc.
2) Minimum half of the produced volume is sold on the domestic market of Russia and CIS.
3) Most of the volumes for export are sold according to the state quotes to the state companies abroad.
4) The remaining export volumes are sold by the daughter commercial organizations of the oil producers to the highest bidder.
Specification
Mazut M100 High Sulphur
Description |
Typical |
Guaranteed |
Method |
Specification gravity at 16.6 C. Deg |
0.8800 |
(0.8870) |
D – 1298 |
Kin. Viscosity at 40 C. Deg (CST) |
9.35 |
Less than 12.00 |
D – 445 |
Kin. Viscosity at 100 C. Deg (CST) |
1.06 |
Less than 1.50 |
D – 445 |
Viscosity Index |
95 |
95 Min |
D – 2270 |
Flash Point (COC). C. Deg |
60 |
75 Max |
D – 92 |
Pour Point C. Deg |
-3 |
-9 Max |
D – 97 |
Total Acid No. MG KOH/GH |
0.013 |
0.05 Max |
D –974 |
Conradson CarbonWT % |
0.08 |
0.1 Max |
D – 524 |
Ash Content (WT%) |
0.008 |
0.01 Max |
D – 482 |
Water Content Vol% |
NIL |
NIL |
D – 95 |
Colour (ASTM) |
1.5 |
1.5 Max |
D – 1500 |
Sulphur WT% |
0.75 |
1.5 Max |
D – 4294 |
Oxidation Test (Viscosity Ratio) |
1.2 |
1.2 Max |
IP 48 |
Vanadium PPM |
|
150 Max |
|
Sodium PPM |
|
100 Max |
|
Cetane Index |
43 |
52 Max |
|
Mazut M100 Low Sulphur
Description |
Typical |
Guaranteed |
Method |
Specification gravity at 16.6 C. Deg |
0.8832 |
(0.8870) |
D – 1298 |
Kin. Viscosity at 40 C. Deg (CST) |
9.35 |
Less than 12.00 |
D – 445 |
Kin. Viscosity at 100 C. Deg (CST) |
1.06 |
Less than 1.50 |
D – 445 |
Viscosity Index |
95 |
95 Min |
D – 2270 |
Flash Point (COC). C. Deg |
110 |
110 Max |
D – 92 |
Pour Point C. Deg |
-3 |
-9 Max |
D – 97 |
Total Acid No. MG KOH/GH |
0.013 |
0.05 Max |
D –974 |
Conradson CarbonWT % |
0.08 |
0.1 Max |
D – 524 |
Ash Content (WT%) |
0.008 |
0.01 Max |
D – 482 |
Water Content Vol% |
NIL |
NIL |
D – 95 |
Colour (ASTM) |
1.5 |
1.5 Max |
D – 1500 |
Sulphur WT% |
0.75 |
3.5 Max |
D – 4294 |
Oxidation Test (Viscosity Ratio) |
1.2 |
1.2 Max |
IP 48 |
Vanadium PPM |
|
50 Max |
|
Sodium PPM |
|
45 Max |
|